The HDS-14LSX pulls double duty as both a legendary 14,000-lb. capacity lift and an alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize alignment convenience. Even though the vehicle is completely secure, the wheels respond to your every adjustment with virtually no resistance. Imagine: the raw lifting power of BendPak’s Best combined with a free-floating four-wheel alignment system. Your job just got easier. This model is available with optional drive-thru ramps, dip-trays and rolling jacks.

Lifting capacity: 14,000 lbs. / 6,350 kg Front axle max capacity: 7,000 lbs. / 3,175 kg Rear axle min capacity: 7,000 lbs. / 3,175 kg Overall width: 130" / 3,301mm Outside length: 213" / 5,408 mm Overall length: 241" / 6,131 mm Height of columns: 92" / 2,338 mm Runway min height: 7-5/8" / 192 mm Max rise: 70" / 1,778 mm Max lifting height: 77-5/8" / 1,970 mm Width between posts: 120" / 3,046 mm Runway width: 20" / 508 mm Width between runways: 37-1/2" – 51-1/2" / 953 mm – 1,314 mm Length of runways: 199" / 5,054 mm Min 4-wheel alignment: 90” / 2,289 mm Max 4-wheel alignment: 155” / 3,947 mm Max 2-wheel alignment: 174” / 4,425 mm Min wheelbase @ rated capacity: 140" / 3,556 mm Min wheelbase @ 75% capacity: 120" / 3,048 mm Min wheelbase @ 50% capacity: 100" / 2,540 mm Min wheelbase @ 25% capacity: 80" / 2,032 mm Locking positions: 13 Lock spacing: every 4" / 102 mm Lifting time: 60 sec Motor: 220 VAC / 60 Hz / 1 Ph Shipping weight: 2,693 lbs. / 1,222 kg Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.